UNC Thread (8-212) Lifting Point
|
Item No. |
Working Load |
Thread version |
Dimensions |
Torque in |
N.W. |
||||||||||
|
M |
E |
TPI |
A |
B |
C |
D |
F |
G |
H |
S |
SW |
||||
|
tonnes |
inch |
inch |
inch |
Nm |
lbs |
||||||||||
|
8-212-010 |
1 |
1/2 |
0.75 |
13UNC |
1.30 |
1.46 |
1.73 |
0.53 |
3.86 |
2.24 |
1.42 |
5/16 |
3/4 |
100 |
1.1 |
|
8-212-015 |
1.5 |
5/8 |
0.94 |
11UNC |
1.30 |
1.46 |
1.81 |
0.53 |
3.86 |
2.24 |
1.42 |
3/8 |
15/16 |
150 |
1.1 |
|
8-212-020 |
2.5 |
3/4 |
1.10 |
10UNC |
1.97 |
2.13 |
2.20 |
0.65 |
5.51 |
3.23 |
1.73 |
1/2 |
1 1/8 |
250 |
2.9 |
|
8-212-025 |
2.5 |
7/8 |
1.10 |
9UNC |
1.97 |
2.13 |
2.28 |
0.65 |
5.51 |
3.23 |
1.73 |
5/8 |
1 5/16 |
300 |
2.9 |
|
8-212-040 |
4 |
1 |
1.61 |
8UNC |
1.97 |
2.13 |
2.34 |
0.65 |
5.51 |
3.23 |
1.73 |
5/8 |
1 1/2 |
400 |
3.1 |
|
8-212-050 |
5 |
1 1/4 |
1.61 |
7UNC |
2.36 |
2.56 |
3.23 |
0.89 |
6.69 |
3.90 |
2.44 |
7/8 |
1 7/8 |
500 |
6.8 |
|
8-212-080 |
8 |
1 1/2 |
2.25 |
6UNC |
3.03 |
3.35 |
4.01 |
1.04 |
8.86 |
4.88 |
3.07 |
1 |
2 1/4 |
800 |
12.8 |
|
8-212-150 |
15 |
1 3/4 |
2.63 |
5UNC |
3.74 |
4.09 |
4.48 |
1.42 |
10.08 |
6.22 |
3.39 |
1 |
2 5/8 |
1500 |
24.0 |
|
8-212-200 |
20 |
2 |
3.00 |
4.5UNC |
3.74 |
4.09 |
4.76 |
1.42 |
10.20 |
6.22 |
3.54 |
1 1/4 |
3 |
2000 |
25.5 |
|
* Design Factor 4:1 * Bolt in GEOMET® finished on request |
|||||||||||||||
Design Factor 4:1
* Bolt in GEOMET® finished on request
- Taiwan Patent
- China Patent
- Rotates through 360° and pivot 90°.
- Manufactured from alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are UNC thread (ASME / ANSI B18.3.1M)
- Individually proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
WARNING: The maximum loads shown are applicable only for new products or in perfect condition.
Do not exceed maximum rated capacities.
For more details, click here to see the supplier’s catalogue.
