UNC Thread (8-232) Anchor Point
|
Item No. |
Working Load Limit |
Thread version |
Dimensions (inch) |
Torque in |
N.W. |
||||||||||||
|
tonnes |
inch |
TPI |
A |
B |
C |
D |
F |
G |
H |
R |
S |
SW |
Nm |
lbs |
|||
|
y |
(z) |
M |
E |
||||||||||||||
|
8-232-010 |
0.8 |
1.6 |
1/2 |
0.81 |
13 UNC |
1.3 |
1.57 |
1.20 |
0.41 |
3.17 |
2.28 |
0.90 |
0.67 |
5/16 |
3/4 |
100 |
1.8 |
|
8-232-020 |
1.6 |
2.6 |
5/8 |
1.13 |
11 UNC |
1.97 |
2.13 |
1.81 |
0.65 |
4.61 |
3.54 |
1.42 |
1.06 |
3/8 |
15/16 |
150 |
2.0 |
|
8-232-030 |
2.4 |
4.0 |
3/4 |
1.54 |
10 UNC |
1.97 |
2.07 |
1.89 |
0.65 |
4.61 |
3.54 |
1.42 |
1.06 |
1/2 |
1 1/8 |
250 |
2.2 |
|
8-232-038 |
3.0 |
4.5 |
7/8 |
1.42 |
9 UNC |
2.56 |
2.99 |
2.28 |
0.79 |
6.02 |
4.25 |
1.73 |
1.34 |
5/8 |
1 5/16 |
300 |
4.3 |
|
8-232-050 |
4.5 |
7.4 |
1 |
1.61 |
8 UNC |
2.81 |
3.17 |
2.34 |
0.98 |
6.38 |
4.92 |
1.73 |
1.46 |
5/8 |
1 1/2 |
400 |
5.7 |
|
8-232-078 |
6.25 |
9.6 |
1 1/4 |
2.09 |
7 UNC |
3.43 |
3.66 |
2.23 |
1.18 |
8.07 |
5.83 |
2.44 |
1.79 |
7/8 |
1 7/8 |
500 |
11.0 |
|
8-232-125 |
10.0 |
11.0 |
1 1/2 |
2.40 |
6 UNC |
4.29 |
4.38 |
3.87 |
1.42 |
9.92 |
7.40 |
3.07 |
2.22 |
1 |
2 1/4 |
800 |
21.2 |
|
8-232-200 |
16.0 |
16.0 |
2 |
3.00 |
4.5 UNC |
4.61 |
3.80 |
4.46 |
1.42 |
9.93 |
7.71 |
3.35 |
2.38 |
1 1/4 |
3 |
2000 |
25.6 |
* Proof Load is 2.5 times the Working Load Limit on the 5:1 design factor.
* Bolt in GEOMET® finished on request
Also available in Metric
- Taiwan Patent
- China Patent
- Rotates through 360° and pivot 180°, and simultaneously allows lifting from any direction.
- Manufactured from forged alloy steel, quenched and tempered.
- Manufactured and tested in accordance with EN1677-1.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolt are UNC thread (ASME / ANSI B18.3.1M).
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 1.5 times the WLL.
- All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required.
WARNING: The maximum loads shown are applicable only for new products or in perfect condition.
Do not exceed maximum rated capacities.
For more details, click here to see the supplier’s catalogue.
